blade shears general safety rules

 First, before the operation to wear tight-fitting protective clothing, cuffs fastened jacket hem is not open, not in the starting of the machine next to wear off clothes or cloth around the flap discs  body, to prevent the machine twisting injury. Must wear a helmet, braids should be placed inside the cap, not wearing a skirt, slippers. Second, the machine operator must be familiar with Hydraulic Guillotine Shear blade main structure, performance and use. Third, the machine is suitable for cutting material thickness of the various machine rating plate, copper, aluminum and non-metallic materials, lumber, and must be no hard marks, welding slag, slag, weld materials, not granite polishing pads  super thick . Fourth, Hydraulic Guillotine Shear blades to use: a, in accordance with the thickness of the material being cut, adjusting the blade clearance. b. According to the material being cut width adjustment by mold or fixture. C, the machine operator before air travel for 1-3 times the normal only after the implementation of cutting work. Fifth, the use of such findings does not operate normally, immediately turn off the power down to check. Sixth, adjust the machine, you must cut off the power, move the workpiece, should pay attention to the safety of the hand. Seven, the machine should be kept lubricated ministries, each class should operatives filling oil once every six months by a mechanic once for filling oil bearing parts.