diamond tools classification and diverse models

Diamond tools classification and model diversity, then we in the use and maintenance What precautions do? Here are the next, for your reference.
One can not be a single point diamond dressing tool head vertically aligned wheel center, which normally takes tilted 10-15 °.
2, diamond tools in place to clamp head, be careful not to bump into the wheel surface.
3, heat dressing tools can not be "hardened" in the dry dressing must be kept trimmed twice the interval sufficient to heat the dressing tool cooling.
4, can not assume wheel surface with  cutting wheels an ideal flat. When trimming the beginning to find the highest point of the wheel position for trimming.
5, if possible, in addition to the amount of each wheel of the repair, the radius of the wheel can not exceed 0.001 inches. In addition to the amount of the repair is too large diamond dressing tool head can cause premature wear and often broken. diamond wheel some of the issues 1 cutting wheel installed at check carefully before you confirm whether cutting wheel deformation, cracks, chipping and so on.
2 Use the wheel cutter, you must  4 inch circular saw blade follow the wheel size specifications and performance options to use wheel cutter specifications.
3 First use the alignment angle, note the distance ≤ 0.5mm, Xu Xiangqian forward, both contacts must never force to avoid damage.
4 If you are using does not match the workpiece to be cut with a cutting wheel, prone to abnormal wear, sharp bad, abnormal fever.
5 cutting process if abnormal, should  hole saw blades be shut down immediately.
6 When the cutting is not sharp, to be trimmed on the blade wheel. If you continue to use overheat, overload leaving the wheel breakage.
7 wheel rotation, is strictly prohibited hand-operated cutting, not by hand, and physical contact wheel.
8 cutting wheel is strictly prohibited except for grooving or cutting operations, to avoid uneven force abnormal
9 natural diamond extremely hard, wear-resistant non-edge, not collision, so as to avoid undue loss.