Diamond high hardness and excellent mechanical properties make diamond tools

 Diamond high hardness and excellent mechanical properties make diamond tools for processing a variety of hard materials become indispensable effective tool. Metal base of the diamond matrix adhesion (matrix package Xiang ability) that affect the life and performance of diamond tools is one of the main factors.
The diamond and general metals and  alloys having a high interfacial energy between, resulting in the diamond particles can not be generally low-melting alloy infiltration, poor adhesion, in the conventional manufacturing techniques, the diamond particles alone after the carcass shrink the mechanical gripping force embedded in the metal matrix of the  12 inch saw blade carcass, but not form a strong chemical bonding or metallurgical combine, resulting diamond particles in the work easily with metal base carcass separation, greatly reducing the diamond tool life and performance levels. Most of the diamond impregnated type tool utilization is low, a lot of expensive diamond in the work lost in the litter fall into. Lin Zengdong other first surface metallization using diamond diamond surface to impart a number  drill bits of new features, such as excellent thermal conductivity, good thermal stability, improving its original physical and chemical properties of the metal or alloy to improve its wettability of the solution, etc.
Diamond surface metallization problem , it caused a domestic diamond tool manufacturing industry's attention. Many people committed during the sintering process to achieve the diamond surface of metal in the matrix material or on the diamond surface to add the pre-glue strong carbide metal powder (which is not heated before the diamond, not associated with a chemical coating reaction only belong diamond coating) to expect them hole saw blades  to realize the sintering process chemical bonding of the diamond. Although the literature has demonstrated some metal such as tungsten (not oxidized) at a lower temperature (800 ℃ or so) WC can be formed on the surface layer of the diamond, but the diamond surface to achieve the pre-metallization process used to view, to be in a vacuum conditions, 600 ℃ heating above one hour to get the desired adhesion. Impregnated with the most commonly used cutting tool diamond sintering conditions of view, non-vacuum or low vacuum of not more than 900 ℃ heated for 5 minutes or so