saw blade with precautions

1, must be carefully read before using manual cutting machine and packaging items mentioned on the cover.
2, according to the wet diamond polishing pads  choice of materials to be cut blade varieties, and check blades for cracks, distortions, lost teeth, do not use if damaged blade.
3, be sure to use a good cutter blade casing mounted guard, and wear face masks or protective eye.
4, the blade cutting machine please check before installation whether spindle runout, when the blade mounting flange and nut set with tight after installation and people must be the center hole of the blade is firmly fixed on the flange, according to Taiwan, a gasket must be good washer buying gently pushed manually rotating blade confirm whether the eccentric shaking.
5, after installing alloy saw before use preroll one minute, until the machine into operation only when the cutting operation.
6, the non-automatic cutting operation, you must gently normal operation of the saw blade enters the  circular saw  material, Forced hard pushed hard prohibited. And to prohibit reverse prohibit suddenly saw parked in the middle of the cut material, or cause jagged off, saw body deformation, prone to danger.
7, the use of abnormal sound heard and saw abnormal shaking or section does not usually stop the job and find the reason for the exception, the dry cut blades  timely replacement blades.
8, after cutting please wipe rust oil to prevent blade rust due to long periods of use.
9, insert the blade perpendicular to the tool holder to hang in a dry, avoid wet areas. Do not place the blade flat on the ground, otherwise easily lead to blade deformation. Do not directly stacked multi-chip saw blade shall be spaced packaging to avoid jagged collision should gently.
10, when the blade is not sharp serrated grinding again, not easy to damage teeth grinding time original angle affect cutting accuracy and shorten the life of saw blade.